Configure Lock, Latch and Deadbolt Sets

 
 
 
Handle
View Handles
Trim
View Trimsets
Finish
View Finishes
Lock/Latch/Dummy
View Locks
Function
View Functions
Backset
Hand
Door Thickness
 
 
 
 
 
 
 

Design

1147

RA

6204

 
 

Lock, Latch, or Dummy

SM

A

 
 

Lock/Latch Configuration

2 34

RHR

1 34

 
 
 

Design

Lever

 

1147

 

The lever or knob selection is indicated with a four-digit FSB Design number.

If you are specifying a lock type or function which does not require a lever handle, begin your specification code with the trim set designation.

 
 

Trim Set

RA

We have simplified specifying locksets by utilizing a code for the eleven most common trim sets.

Please note that use of Trim Set RA, RB, RC and RD with Series NM is restricted by backset and stop width.

 
 

Material & Finish

6204

While FSB stocks natural anodized aluminum and satin stainless steel in its North American distribution facility, FSB offers its products in as many as twenty different finishes.

 
 

Lock, Latch, or Bolt

Lock Type

SM

The lock type is indicated with two capital letters.

Functions are dependent on lock type. Not all functions are available for all lock types.

 
 

Lock Function

F

The lock and latch functions as well as dummy sets are indicated with a letter.

Trim sets are dependent on lock function. Not all trim sets are available for all functions.

 
 

Configuration

Backset

2 34

FSB offers ten different backsets for mortise locks and two for tubular latches.

 
 

Handing

RHR

Doors are either right hand (RH) or left hand (LH) inswinging or right hand reverse (RHR) or left hand reverse (LHR) outswing ing, relative to which way they open.

The hand of a door is always determined from the outside (locked side) of a door.

 
 

Door Thickness

1 34

Standard doors almost invariably feature standardized door thicknesses.

FSB spindles are available from stock for door thicknesses 1 38″ to 2 14″ . FSB can supply spindles for doors up to 3 12″ thick on special order.

The thickness of doors should be checked and any discrepancy pointed out when ordering.